Free tool

World Meeting Time Planner

Pick a date and a meeting time in your own time zone, add up to four cities, and see the local time everywhere at once — with honest flags for who is in work hours, who is up early, and who you are asking to join at midnight.

—Meeting overlapPick a date, time, and cities, then convert.

How to use the Meeting Time Planner

  1. Pick the date and time you have in mind, in your own time zone — the zone you select in the “Your time zone” field.

  2. Choose up to four cities where your other attendees are. Presets cover the US zones from Eastern to Pacific, London, and major cities across Europe, Asia, and Australia.

  3. Press “Convert times” and read the table. Each city shows its local date and time, and a flag showing whether that time falls inside typical 9 AM to 5 PM work hours. Try a few candidate times and keep the one with the fairest spread.

Why finding a meeting time is harder than it looks

Scheduling across time zones fails in predictable ways. Someone does the offset math from memory and forgets that one of the cities is on daylight saving time while the other is not. Someone books 9:00 AM their time without checking that it is 11:30 PM somewhere else. Someone sends an invitation that says Tuesday, which is correct in Chicago and already Wednesday in Singapore. None of these people are careless. The problem is that time zone conversion is exactly the kind of arithmetic humans are bad at: the offsets change twice a year, they change on different dates in different hemispheres, and a few zones sit on half-hour offsets that break mental shortcuts.

This planner removes the mental arithmetic entirely. You think in your own zone, the way you naturally do, and the tool converts the actual instant — the specific date at the specific time — into each city using the full time zone database built into your browser. That database knows that London moves to British Summer Time on the last Sunday of March, that most of the United States springs forward on the second Sunday of March, and that Sydney moves in the opposite direction because its seasons are reversed. Converting a January meeting and a July meeting between the same two cities can legitimately give answers an hour apart, and the planner gets both right because it converts the date you picked, not a generic offset.

The second thing the planner does is just as important: it judges the result. A conversion table tells you the times; the work-hour flags tell you whether those times are fair. Each city is marked as inside work hours (9 AM to 5 PM), early or late but survivable, or in the middle of the night. Scanning the flags for a few candidate slots quickly reveals the best overlap, the time where the most people are inside their workday and nobody is being asked for a heroic effort. Remote teams, online tutors, freelancers with overseas clients, and students in group projects across countries all face the same puzzle, and this is the tool that lays the pieces out flat.

Worked example: 11:00 AM in New York

Suppose you are in New York and you propose a meeting at 11:00 AM Eastern on a weekday in June, with teammates in Chicago, Los Angeles, and London. The planner converts that single instant across the map. In Chicago it is 10:00 AM Central, comfortably inside the workday. In Denver, if you added it, it would be 9:00 AM Mountain, the very start of the workday. In Los Angeles it is 8:00 AM Pacific — an hour before the typical 9 AM start, early but reasonable, the kind of slot most people accept without complaint for a meeting that matters. In London it is 4:00 PM, inside the workday with an hour to spare before a 5 PM finish.

That spread is close to the best the US-to-London corridor ever gets, and the reason is simple geometry. London is 5 hours ahead of New York and 8 hours ahead of Los Angeles. For Los Angeles to reach 9:00 AM, New York is already at noon and London is at 5:00 PM, the edge of its day. For London to finish by 5:00 PM, New York must start by noon and Los Angeles by 9:00 AM. The overlap window where all three are inside 9 to 5 is therefore a single point on the clock rather than a comfortable range, and every real team on this corridor lives slightly outside it, usually by asking the West Coast to start a little early, because an 8:00 AM start is kinder than a 6:00 PM finish in London running into family time.

Now watch what changes in winter. Run the same 11:00 AM New York meeting in January and Los Angeles is still 8:00 AM and London is still 4:00 PM, because both regions observe daylight saving on similar schedules. Add Sydney, though, and the picture flips with the seasons: in June, 11:00 AM in New York is 1:00 AM the next day in Sydney, while in January it is 3:00 AM. There is no humane slot that joins the US East Coast and Sydney inside both workdays, which is why experienced global teams record those meetings, rotate a 7:00 AM and 7:00 PM pattern, or split into regional sessions. The planner cannot bend the planet, but it shows you the true cost of each option before you send the invite.

How to choose the fairest slot, not just a possible one

A possible slot is any time the meeting can technically happen. A fair slot is one where the inconvenience is shared in proportion to what people can actually give. Start by testing three candidate times an hour apart and comparing the flags. Prefer the slot with the most cities inside work hours. If two slots tie, prefer the one where the out-of-hours burden falls on the largest group rather than a single person, and where it falls early in the morning rather than late at night for most people — a 7:30 AM start after a normal night of sleep is usually easier than a 10:30 PM meeting that cuts into the wind-down before bed. Our Sleep Calculator shows why: late meetings push bedtime later and break up sleep cycles, so the cost of a late slot follows a person into the next day.

For recurring meetings, build fairness into the calendar itself. Rotate the slot monthly between two or three times that each favor a different region, and say so openly when you set the series up. People tolerate an awkward hour remarkably well when they know it rotates and that their turn in the comfortable slot is coming. What corrodes remote teams is the permanent pattern: headquarters always at 10:00 AM, the far office always at 9:00 PM, month after month, with the arrangement treated as natural. The planner helps here too, because printing the local times side by side makes the imbalance impossible to unsee.

Two practical habits finish the job. First, always send the invitation from a calendar app with the time zone set correctly, and in the message itself, write out the local times for each city in words, copied from the planner. If the calendar and the written times ever disagree, someone will spot it before the meeting instead of after. Second, re-check the plan whenever a daylight saving change falls between now and the meeting. A series created in February for April can silently shift by an hour for one city when the clocks move. Thirty seconds in the planner on the new date catches it.

Common mistakes when planning across time zones

Meeting Time Planner FAQs

How does the Meeting Time Planner handle daylight saving time?

It uses the time zone rules built into your browser, which know the exact daylight saving dates for every city in the list. A meeting planned for March converts differently from the same clock time in January, because the planner converts the actual date you pick, not a fixed offset. Always check the converted times again if a daylight saving change falls between today and your meeting date.

What counts as work hours in this planner?

The planner flags 9:00 AM to 5:00 PM local time as typical work hours. A city shown in work hours means the meeting lands inside that window there. Times before 8:00 AM or after 6:00 PM are worth a second thought even when they are technically the same day, because they ask someone to start very early or stay very late.

Why does the date change for some cities?

Because the world is round and the date line has to sit somewhere. A 4:00 PM meeting in Los Angeles is already the next calendar day in Tokyo and Sydney. The planner always shows the full local date for each city, so nobody joins on the wrong day. When you send the invitation, name the day for the farthest city as well as your own.

How many cities can I compare at once?

Your own time zone plus up to 4 other cities, 5 locations in total. That covers most real meetings, such as a team spread across the US coasts and London. If you have more locations, run the planner twice and look for a time that keeps every group inside or near work hours across both runs.

What is the best meeting time between the US and London?

Late morning on the US East Coast is the classic answer. At 11:00 AM in New York it is 8:00 AM in Los Angeles, which is early but workable, and 4:00 PM in London, which is inside the London workday. There is no time that puts Los Angeles, New York, and London all comfortably inside 9 to 5, so one group always gives a little.

Can I plan a meeting with cities in Asia and Australia?

Yes. The city list includes Dubai, Karachi, Mumbai, Singapore, Tokyo, and Sydney alongside the US and European cities. Be aware that US to Australia meetings almost never fit inside work hours at both ends. Most global teams rotate the pain, alternating an early slot and a late slot so the same people are not always joining at midnight.

Why is sharing the pain of bad meeting times important?

Because a fixed slot that is convenient for headquarters is a permanent 10:00 PM or 5:00 AM for someone else, and that quietly damages trust and retention on remote teams. Rotating the meeting time month by month spreads the burden fairly. The planner makes the trade-offs visible, so the conversation about fairness is based on real local times.

Does the planner account for my own time zone automatically?

You pick your own time zone from the list, and the US zones plus London are the presets most visitors need. Choosing it yourself avoids surprises when you travel or use a computer set to a different zone. The conversion itself is done with the standard time zone data in your browser, so it stays correct without any account or download.

Is my meeting information saved or sent anywhere?

No. All conversions run in your browser and nothing is uploaded or stored. The planner does not create calendar invitations, so copy the converted times into your own calendar or email once you have found a slot that works.

Copied