Scientific Calculator
Trig, logs, powers, roots and factorials — a full scientific calculator that runs entirely in your browser.
Tip: you can also type on your keyboard — digits, + − * / ^ ( ) and Enter for equals.
How to use the Scientific Calculator
Tap the keys (or type on your keyboard) to build your expression — it shows in the display above the keypad.
Check the angle mode: trig functions default to DEG (degrees). Tap the DEG button to switch to RAD for calculus.
Press = (or Enter) to evaluate. The answer appears large under the display, and your last calculation is kept in the history line.
What this calculator can do
This calculator covers the full high-school and college toolkit: trigonometry (sin, cos, tan in degrees or radians), logarithms (log base 10 and natural log ln), powers and roots (^ and √), factorials (n!), and the constants π and e. It follows the standard order of operations — parentheses first, then powers and roots, then multiplication and division, then addition and subtraction — so 2 + 3 × 4 correctly gives 14.
A few handy combos: sin(30) in DEG mode = 0.5; log(100) = 2; √(16) = 4; 5! = 120; 2^10 = 1024. You can write stacked powers like 2^3^2, which evaluates right-to-left as 2^(3²) = 512, exactly like a textbook. Implicit multiplication works too — 2π means 2 × π, and 3(4+5) means 3 × 9.
For everyday percentage math (discounts, tips, grade bumps), our percentage calculator is the simpler pick; for physical-science problems with mixed units, pair this with the unit converter first.
Degrees vs radians: the #1 mistake
Almost every “my calculator is broken” moment is an angle-mode problem. If your homework is about triangles, angles, or bearings, you almost certainly want degrees: sin(30°) = 0.5. If you are doing calculus (derivatives of sin x, Taylor series), you want radians: sin(π/2) = 1.
Quick self-check: type sin(30). If you get 0.5, you are in degrees — correct for most schoolwork. If you get −0.988, you are in radians. Tap the DEG/RAD button at the top of the calculator to flip modes before you trust a trig answer.
Worked example: the ladder problem
A 5-metre ladder leans against a wall with its foot 3 metres from the base of the wall. Two questions: how high up the wall does the ladder reach, and what angle does it make with the ground? Both are one-line calculations on this calculator.
Height first — Pythagoras. The ladder is the hypotenuse, so height = √(5² − 3²) = √(25 − 9) = √16 = 4 metres. Type √(5^2-3^2) and press equals: the answer is exactly 4 — a classic 3-4-5 triangle. The angle comes from cosine: cos(angle) = adjacent ÷ hypotenuse = 3 ÷ 5 = 0.6, and the inverse cosine of 0.6 is 53.13°. Notice the mode: that last step needs degrees. In radians mode the same angle comes back as 0.927 — the same answer expressed the other way, and a wrong-looking one if your homework expects degrees.
Common mistakes with scientific calculators
Most wrong answers from a scientific calculator are not arithmetic errors — they are setup errors. These five cause almost all of them:
- Wrong angle mode. Trig worked in radians when the question is in degrees (or the reverse) silently wrecks every answer. Run the sin(30) check described above before you start a problem set.
- Missing parentheses. sin(30 + 15) means sin(45°) ≈ 0.707; sin(30) + 15 means 15.5. The calculator evaluates exactly what you type, so group anything that belongs together.
- Expecting −2^2 to be 4. By convention, powers bind before the minus sign, so −2^2 = −(2^2) = −4. If you mean (−2)², type the parentheses.
- Feeding logs impossible values. The log and ln of zero or a negative number have no answer. The calculator shows an error instead of a wrong number — treat that as your cue to re-read the question.
- Rounding too early. Rounding every step of a long problem to two decimals lets small errors compound. Keep full precision until the final step, then round once.
Scientific Calculator FAQs
What does a scientific calculator do that a basic one does not?
Beyond add, subtract, multiply and divide, a scientific calculator handles trigonometry (sin, cos, tan), logarithms (log base 10 and natural log ln), powers and roots, factorials, and constants like π and e. It also respects the order of operations, so 2 + 3 × 4 gives 14, not 20.
Should I use degrees or radians?
Use degrees for most school geometry and everyday problems (for example sin(30°) = 0.5). Use radians for calculus and higher math. This calculator defaults to degrees; tap the DEG button to switch to radians. Using the wrong mode is the most common source of wrong answers, so check it first.
What is the difference between log and ln?
The log button computes the base-10 logarithm (log(100) = 2), which is common in chemistry (pH) and engineering. The ln button computes the natural logarithm with base e (ln(e) = 1), which is standard in calculus, finance and growth models.
How do I type powers and square roots?
Tap ^ for powers: 2^3 = 8, and 2^0.5 gives the square root of 2. Or tap √ directly: √(16) = 4. Powers are right-associative, so 2^3^2 means 2^(3^2) = 512, matching how math textbooks treat stacked exponents.
Why does my factorial give an error?
Factorial is only defined for whole numbers from 0 to 170 (171! is too large to store). Entering 5.5! or a negative number shows an error because those values have no factorial in standard math.
Is my data sent anywhere?
No. All calculations run in your browser and nothing is uploaded or stored.
How do I work out a percentage on this calculator?
Multiply the amount by the percentage written as a decimal. For 15% of 240, type 240*0.15 and press equals — the answer is 36. To find what percentage one number is of another, divide them: 36/240 = 0.15, which is 15%. For discounts, tax and grade percentages, the percentage calculator on this site handles the setup for you.
Can I use this calculator in an exam?
Usually not. Most exam boards — including the College Board for AP exams and UK boards such as AQA and Edexcel — require an approved physical calculator and ban internet-connected devices. Use this calculator freely for homework, revision and checking practice answers, and check your own exam's rules before the day.
Why is my answer slightly different from the textbook's?
Two usual causes. First, rounding: textbooks often round intermediate steps, while this calculator keeps full precision until the end, so the last digit can differ. Second, angle mode: a trig answer that is wildly different — not just in the last digit — almost always means degrees and radians got mixed up.